Reader Work

I received several nice comments on my Stars and Scrappy Stripes Tutorial - thank you!

And two readers sent me photos of their first block.

This one is from Linda:

She is using up scraps left over from a Civil War quilt.

And this one is from Gina in Missouri:

She is using blues with white stars.

Both are fantastic! Thank you ladies for sharing. If anyone else has made a block (or two) and would like to share a photo, just send it to me. You can contact me directly by clicking on the "view my complete profile" link at the top right of this page, bottom of the "about me" section.

Long Overdue Project

I have been putting off recovering my ironing table for over a year. I knew it would take several hours of my precious sewing time to complete the project and I was right. It took me all afternoon yesterday to remove and recover my ironing table.

The old cover was torn, scorched, too cushy and had developed a sticky residue in places.

Before:

After:

It wasn't a fun project but it is nice to have a new surface for ironing. It is also nice to regain the storage space the materials were taking up in my sewing room. I'm sure I will quickly find something to fill the shelf space this created. Unfortunately, I don't have to look further than the floor.

Star Value Quilt of Valor Top

I finally finished piecing my Star Value Quilt of Valor.

Notice the clothespin at the bottom left in the photo above. I put it on that corner in an attempt to weight that corner down a bit. I was lucky to get the photo above yesterday. It was very windy.

Click here for the free pattern from Melissa of Happy Quilting. I adjusted the pattern a bit so that I don't have any partial stars. This also makes the quilt a better size for a Quilt of Valor. It will finish at 60" by 72".

Spring Break 2014

This week has been Spring Break for us. We went out of town for a couple of days.

We saw two movies: The Muppet Movie and Mr. Peabody & Sherman.

We enjoyed them both.

The hotel had an indoor pool, a requirement for us. The boy swam both days. It was nice that there were other kids in the pool both days for him to play with.

We did quite a bit of shopping. I don't mind shopping online, but it is nice to be able to touch and try on things occasionally. I didn't drag them to any quilt stores but did spend about an hour in Eddie Bauer trying on every style of pants they had. I came home with a couple of pairs of pants and now know my size and style preference so I can order with confidence.

My boys with their new shoes

We didn't go far, just to Colorado Springs.

Pike's Peak is visible from any where in town

We used to live in Colorado Springs. We know where things are and there are many fun things to do in The Springs.

Free Motion Quilting Sample Book

I'm teaching a Free Motion Quilting class starting in April at my LQS, Heartstrings and Heirlooms. I finished up the class sample over the weekend. In the class the students will do larger samples, but I needed a small book of designs to advertise the class.

As you can see in the above end view, I used three different types of batting for my sample book - Quilter's Dream 100% Cotton, Hobbs 80/20 (80% cotton and 20% polyester), and a 100% wool.

I used a tutorial from a recent Quilting Arts Magazine issue (the February/March 2014 issue) to make my little book. The instructions involved drawing some lines on a piece of fabric, then sewing on the lines with a walking foot to make a larger sheet and baste the layers together.

Then you quilt your designs and cut the "pages" apart. The tutorial in the magazine was very good. If you are interested in making a book like mine, I suggest you get a copy of the magazine.

Below is a collage of designs I plan to cover in the class.

Along the top of each page I wrote the name of the design, the batting type and page number from the book I will be using for the class. In case you are interested, I'm using the book Free Motion Quilting with Angela Waters. It has become my go-to book for quilting ideas as of late.

A Tutorial: Stars and Scrappy Stripes

This tutorial makes a 45" by 54" finished quilt. It uses 30 blocks in a 5 blocks across by 6 blocks down layout. The finished block size is 9" by 9" square.

You will need:

• 1 yard of star fabric (this is the black in my quilt) 
• (720) 1.5" by 3.5" scrap rectangles. 

I cut my scraps 1.5" by 3.75" because I often have difficulty with strips lining up once sewn. This adds an extra step to the process and wastes a little bit of fabric, but increases my accuracy. You cut your pieces however you want. Another option would be to cut longer 1.5" strips and sew these together into threes then cut your strip set units from this. Most of my scraps were not long enough to do this and I wanted the freedom to get more variety so I just cut the rectangles.

From the star fabric cut (3) 3.5" by WOF (width of fabric) strips; then subcut these into (30) 3.5" by 3.5" squares. For reference, you should be able to get (11) 3.5" squares from one WOF strip.

From the star fabric cut (12) 2" by WOF strips; then subcut these into (240) 2" by 2" squares. For reference, you should be able to get (20) 2" squares from one WOF strip.

I'm giving you the number of squares you can get from the WOF strips so that you can adjust the pattern to make more or fewer blocks if you desire. The (1) yard of star fabric required is sufficient for a 30 block (45" by 54" finished size) quilt. If you want to resize the quilt, adjust the star fabric required accordingly.

Step 1: Pick three scrap rectangles and layout them out in a pleasing arrangement. Don't agonize over this!

Three scrap rectangles

Step 2: Sew them together. Really, just pick up two strips and sew them together! When it comes time to add the third, just make sure it isn't the same fabric as either of the first two. Agonizing over whether or not the three fabrics "go" together just wastes time and doesn't make a bit of difference in the finished quilt.

One scrap unit

Press this unit however you want. It won't matter in the end. I pressed all the seams in the same direction.

Step 3: Trim the above unit into a 3.5" by 3.5" square. I looked through my units to find one that would photograph nicely for this step.

Scrap unit needs squaring up

Notice that my three rectangles are not all the same length. Remember I cut these at about 3.75" long, but obviously one of these was closer to 4" long. It doesn't matter. Trim off each of the pieced edges so that you end up with a 3.5" by 3.5" square. Note that the unit does measure 3.5" tall because my strips were accurately cut to 1.5" wide.

Squaring up the scrap unit

You will need (240) of these units to make a 30 block quilt. 

To make one block you will need (8) three strip scrap units (this unit is often called a Rail Fence Block), (1) 3.5" by 3.5" square of star fabric and (8) 2" by 2" squares of star fabric. Again, my star fabric is the black in these photographs.

Pieces for one block

Step 4: You will be sewing on the diagonal of the (8) 2" squares of star fabric. Since my star fabric is black, a drawn line is hard to see. I could use a white pencil to mark the diagonal. I could also press the square in half along the diagonal either by finger pressing or using an iron. However, I prefer to use my Clearly Perfect Angles tool instead. There are other similar products available that do the same thing. You can also just use a piece of masking or painters tape. I like the Clearly Perfect Angles tool because it is a vinyl cling. It is easy to remove when I'm not using it and it stays in place nicely on it's own when I need it.

Clearly Perfect Angle

Notice the gray bar and the green bar coming toward you (away from the needle) in the photo above. The line between these two bars is centered on the needle. (If you want to use tape, use a ruler to get a straight line coming from the needle. Place the tape right along the edge of the ruler. Use the edge of the tape the same way as the line between the two bars.)

Place your 2" square in the corner of one of the scrap units. Then put the far corner of the 2" square right at the needle and run the opposite corner right along the line between the two bars as you sew, this gives you a perfectly sewn diagonal line with no marking.

Sewing on the diagonal

Choose four of your scrap units and attach one 2" square in this way to each of them. Notice that on two of the scrap units the 2" square is sewn with the strips laying horizontal (top row in photo below) and on the other two scrap units the strips are vertical (bottom row in photo below). This is very important!

One star point attached

At this point you need to decide if you want to cut off both layers 1/4" away from the sewn line, or just one layer or none. I'm living dangerously and cut them both off.

Cut off corners

Then press the star point over to complete the 3.5" square unit again.

One star point completed

Step 5: Attach the other star point. Be sure to attach it to the proper side. In the photograph above, the next star point will get added to the bottom right corner of each unit.

Second star point attached.

Again, cut off the excess (or not) then press the star point fabric over to complete the point.

Star points completed

Now layout your block units. You have (4) star point units, (4) scrap units without points, and (1) star center. All of your units should measure 3.5" by 3.5". They should be laid out as shown in the photograph below.

Block units layout with pressing arrows

You will sew the units together into rows and press the seams according the arrows on the photograph above.

Once you have the rows together, you will have two more seams left to complete the block. The photograph below shows this layout with arrows indicating how these seams should be pressed.

Sew block rows together with pressing arrows

Your finished block should look similar to the one below. 

Completed block, 9.5" unfinished size

I recommend that you construct all of your blocks with the same layout and press as directed so that all of the seams will be opposing when it comes time to put the blocks together. Below is what the back of the block looks like for you to use as a pressing reference.

Back of the block

The quilt layout is shown below.

Quilt layout

At this time the above are the only three blocks I have completed! For the quilt layout, look at the top left corner of each block. Notice that in the first block the strips are vertical in the corner unit. In the middle block, the strips in the top left corner unit are horizontal. In the third block, the strips in the top left corner are vertical. If you just alternate the blocks by turning them so that the strip orientation alternates in the top left corner all your seams will be opposing and all of your strips will alternate.

When I get the top completed I will edit this post to add a photograph of the completed top.

Edited to add a photo of the finished top (April 21, 2014)

If you use this tutorial to make something, please send a picture. I'd love to see your work!

If you have any questions, ask them in the comments but please be sure that I have a way to contact you to answer your question. If you are a "no-reply" blogger, leave your email address in your comment. If you don't know whether or not you are "no-reply" then google "no reply blogger." There are lots of tutorials explaining how to tell whether or not you are "no-reply" and how to fix this if you want to.

Edited to add: A .pdf version of this pattern can be found by clicking this link.

WIP: A Quilt of Valor

I realized at my recent retreat that I was short on white/gray half square triangle units for my Star Value Quilt of Valor. This is why I didn't make more progress on it at the retreat. I remedied that yesterday.

Now that I have the required amount of units I can finish this up. Here is the layout of one block.

I don't know how much progress I will make on this today though. I am planning to do a tutorial for you on the scrap project I showed last week. I took a bunch of pictures yesterday for it. Today I hope to edit the pictures and hopefully have the tutorial written by the end of the week. I realized after I made the post last week that I miscalculated how many scrap rectangles this quilt will require. So I also need to recheck my calculations before I post the pattern!